Roll Out Gutter Extensions Lowe's (2024)

FAQs

Do roll out gutter extensions work? ›

Yes. Installing gutter guards ensures rainwater and meltwater from your roof can flow seamlessly through your gutter system. Adding the right downspout extenders ensures water can flow away from your home's foundation. This can reduce the risk of water damage to your home.

Gutter extensions, also called downspout extensions, are attachments that are placed on the end of the downspout to channel rainwater away from the foundation of the home.

Most homeowners install 5-inch and 6-inch gutters. Larger 7-inch and 8-inch gutters are more suitable for commercial properties. Common downspout sizes include 2”x3” and 3”x4”. A good rule of thumb is that a 6-inch K-style gutter needs a 3”x4” downspout, whereas a 5-inch K-style gutter requires a 2”x3” downspout.

CradleStake are a friction fitting, UV Rated, hard ABS plastic protective product that protects your downspout extensions from the things that can damage them. They also hold your downspout extensions in place so that your downspout extensions can NEVER become separated from your downspout elbow EVER again.

Rather than remove downspouts in winter, plumbing experts prefer to disconnect downspout extensions installed at ground level. You can also avoid detaching your downspouts if you lay deicing cables in gutters and downpipes.

If we have to sum it up in a single rule, gutters need a downspout around every 30 to 40 feet. For most homes, this means installing spouts at either end of a gutter section.

The gutter needs to go a little past your roof's shingles. Three-fourths of the gutter's width should extend past the shingles to catch the water and direct it correctly down the downspouts. The gutter needs to be 2 to 3 inches away from your roof's edge.

You'll also ensure that no part of the gutter is keeping too much water at any moment. Downspouts need to be emptied at least 10 feet away from the house.

The answer differs with every person depending on several factors, such as the kind of landscaping you have, where you live, and accessibility. However, the standard rule is to have the downspout extension at least 4 feet away from the house. Some roofers recommend at least 3 feet, while others prefer 6 feet.

What is the piece called that connects the gutter to the downspout? ›

The Elbows

These are the bent sections of the gutter that are connected to the downspout, this directs the current through the spout. There are also 2 different styles of elbows, they are: The “A” style- when connected to the rain gutter system, this elbow will be pointed towards you and away from the house.

Flexible downspouts can lead rainwater into gardens or rain barrels, facilitating water conservation. By preventing water wastage and efficiently reusing rainwater, you're taking a step towards a sustainable future.

While gutter foam guards aren't a permanent solution to clogged gutters, they can help to prevent any leaves, sticks, and other debris from building up and blocking your gutter. This can reduce the number of times you need to clean your gutters annually because there shouldn't be anything causing blockages.

Pop Up Emitters are the Go To – As Long as Grass Doesn't Grow Over Them. Do pop up emitters work? The answer is yes.

Downsides of Gutter Guards

While gutter guards can be a valuable investment for many homeowners, there are a few downsides to them that include the need for periodic maintenance and cleaning, not eliminating all debris in your gutters, and the cost considerations.

If at all possible, the downspout should end in an elbow and extension that directs the water 5 to 6 feet away from your foundation. However, make sure that it does not extend onto your neighbor's property. The extension should be at a 30 degree or more angle in relation to the ground.